![]() ![]() Ensure the allen key is fully inserted into the hole, it may be necessary to allow the panel to roll back a small way to align the mechanism with the hole. This will be the right hand side if the stand is closest to you and the panel is extending away from you. Once the panel is fully extended insert the allen key into the small hole on the side of the banner stand. Keep pulling it out until you can see the white leader sheet (the piece the panel is stuck to) Pull the existing panel all the way out of the roller banner base. You will need your existing roller banner stand, a printed replacement panel and an allen key for holding the spring (which will be supplied if you have ordered a replacement panel from us.) Step by Step Banners Graphic Guide Step 1 – Pull out the existing panel Also make sure that you have an area clear you can work on such as long table. ![]() Before you startĪlthough changing a roller banner panel is possible on your own, it is much easier if you have someone to help you. If you need help please do contact us and we will be happy to help. To help make the process of swapping panels as easy as possible please read through our step by step banner graphics guide below. ![]() We offer the option of ordering replacement graphic panels online. This can be a good option if your roller banner base has only seen light use and can be recycled, saving some cost and helping the environment. However there may be times when you may want to swap the printed banner with a new updated print. All our roller banners are delivered already inserted into their roller base and are ready to use straight out the box. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |